Rotary Actuators

Rotary Actuators

Rotary Actuators

 

Rotary Actuators

Rack and Pinion
Vane Type
Combination

North American Specifications

NCRA1
The NCRA1 series is a rack & pinion rotary actuator, which offers very high torque-to-size and accurate positioning. Rail type mounting allows switch position to be easily adjusted. Bore sizes available include 30, 50, 63, 80 and 100mm. Single rod end or double rod end models are available.
NCRQ
The NCRQ series is a compact rotary, rack and pinion style actuator. The double rack design eliminates backlash and increases strength. Standard equipment include a built-in rubber bumper and rotation adjustment. Auto switch capabilities are an option.

Metric Specifications

MSQ
The MSQ compact rotary table is ideal for material transfer applications. It incorporates load bearings and a mounting face with a rack-and-pinion style rotary actuator. The seven sizes are 10, 20, 30, 50, 70, 100, and 200 with rotational adjustments from 0-190 degrees, and auto switch capability. Additional features include a hollow shaft and direct load mounting possibility.
CRJ
In our pursuit of excellence in size and weight reduction, we proudly announce the release of the CRJ series, mini-rotary actuator. A new compact body design not only reduces overall space requirements, but also achieves space savings in wiring and piping. Ease in mounting is maximized thanks to the merits of the new compact body. Large roller bearing and large diameter output shaft add to overall compactness while ensuring high rigidity.
CRQ
The CRQ2 series is a compact rotary, rack and pinion style actuator. Single and double shaft types are available in all sizes (10~40mm). The CRQ2 uses internal cushioning and the body can be used as a flange. The use of a double piston eliminates backlash. Auto switches are available.
CRA1-Z
The CRA1-Z rack and pinion actuator offers compact auto switches which can be mounted from the front with width reduction by 14mm.  Bore sizes on standard model are 30, 50, 63, 80, and 100mm.  The angle adjustable type, CRA1**U-Z, has been added to the line in bore sizes 50, 63, 80 and 100. Units may be ordered auto-switch capable and with replaceable cushions.  Many variations of the shaft types are available.   
CVRA1-Z
The CVRA1_Z series is a rack and pinion style rotary actuator with solenoid valve. Available bore sizes include 50, 63, 80 and 100mm. There are five shaft styles to choose from. Other options include angle adjusting unit, with or without cushion, and auto switch capability.
CRA1
The CRA1 rack & pinion rotary actuator offers very high torque-to-size and accurate positioning. Bore sizes are 30, 50, 63, 80 and 100mm. Units may be ordered auto-switch capable and with cushions. Dimensions range from 3" X 4" X 2" to a maximum of 8" X 9.65" X 4.41". Single shaft end or double shaft end models are available.
CVRA1
The CVRA1 series is a rack and pinion style rotary actuator with solenoid valve. Available bore sizes include 50, 63, 80 and 100mm. There are five shaft styles to choose from. Other options include angle adjusting unit, with or without cushion, and auto switch capability.
MSZ
Series MSZ, a 3-position rotary table, can be adjusted to stop at three different positions within a 190º radius.  The MSZ does not require an electric motor, or any complex machinery to function, only compressed air. Designed initially for the selection and separation of work pieces to either the left or right, the rotary table is controlled via a single, 3-position solenoid valve, ensuring simple setup and operation. This series is currently available in two model types, basic and high accuracy (for higher loads and reduced table deflection).  The MSZ can be ordered in four different sizes and is designed to work with an operating pressure range between 0.2 to1 MPa.

Vane Type

North American Specifications
Metric Specifications
European Specifications

Combination

MK-Z
MK-Z has an allowable moment of inertia 3 times higher than the conventional MK and MK2 styles.  The overall length is the same as the conventional styles, and mounting dimensions are interchangeable with the MK series.  Auto switches can be mounted on any of the 4 surfaces with no projection of the switch.
MK
Combining compact cylinder size and rotational capability, the MK2 cylinder is designed for heavy duty clamping applications, with an available integrated arm that swings out of the way when the cylinder is extended. 90deg. clockwise or counter clockwise rotation is available, and clamping arms with adjustment screw are standard options. MK2 is available in 6 bore sizes from 20mm to 63mm and strokes from 10 mm to 50 mm.
MRHQ
The MRHQ series is a rotary gripper suitable for holding and reversing work pieces on transfer lines. The compact integration of gripping and rotating functions eliminates the peripheral piping and wiring of the previous product (rotary table + adapter + air gripper). The length of the MRHQ series has been reduced by approximately 20% compared with the previous products.
MRQ
The MRQ provides linear and rotary motion either simultaneously or alternately. It meets many handling applications, is simple to use, and when combined with SMC grippers, provides combined motions for picking, transferring, and rotation. Available in 32 and 40mm bores with strokes from 5 to 100mm; rotation from 90° to 180°. Connection ports are available on both sides of the cylinder, as well as end-of-stroke sensing for all positions.


Rotary Actuator CRA1/CDRA1

Rotary Actuator CRA1/CDRA1

Rotary Actuator with Auto Switch Rack & Pinion Style1) Size 30 -Basic Style   &nb..

Rotary Actuator Rack & Pinion Style

Rotary Actuator Rack & Pinion Style

Rotary Actuator Rack & Pinion Style 1) Pneumatic : Air ( Non-lube )    ..

Rotary Actuator with Solenoid Valve Rack & Pinion Style

Rotary Actuator with Solenoid Valve Rack & Pinion Style

Rotary Actuator with Solenoid Valve Rack & Pinion Style Size : 50, 63, 80, 100 With /..

Rotary Actuators - 01

Rotary Actuators - 01

Rotary Actuators - 01 Rotary Actuators ..

Rotary Cylinder

Rotary Cylinder

Bore size: 30,40,50,63,80,100, Fluid: Air / Oil Rotary angle: 90 ~ 180 Rod type: sing..

Showing 1 to 5 of 5 (1 Pages)
Wood Flooring